The Setting Instructions Of Teco Inverter And Tecom Ag-300 Plus Gateway - TECOM AG-300 Plus User Manual

The setting instructions of Teco inverter and
Tecom AG-300 Plus Gateway
This setting document is for the Teco inverter (hereinafter referred to as the inverter) and the
Tecom AG-300 Plus Gateway (hereinafter referred to as the AG-300 Plus), in the hardware wiring
and parameter settings for a brief description.
Wiring instructions:
RS-485 wiring between the inverter and the AG-300 Plus, the use of RS-485 for
communication, can be confirmed by Figure 1 wiring instructions.
The inverter can be connected by the terminal S + / S- or RJ-45 terminals to the cloud box.
Inverter
Figure 1. The description of the connection between the inverter and the AG-300 Plus
AG-300 Plus Gateway User Manual
RS-485
Teco
Figure 2. The hardware connection of Inverter
Page
Tecom
AG-300 Plus
44