Device Settings; Network Settings - TECOM AG-300 Plus User Manual

Device Settings

Network Settings

1.
Step 1
- Make sure your PC/NB and the AG-300 Plus e-Gateway are in the same LAN
(Recommended to use DHCP on your PC/NB)
- Connect an Ethernet cable point-to-point between Notebook/PC and AG-300 Plus (LAN
Port)
- Connect the power adapter to AG-300 Plus
- The computer opens the browser, and the address bar enters the AG-300 Plus setup page
URL http://192.168.168.10
- Enter the user name: admin
- Password: IP585xAdmin,
- Click OK.
AG-300 Plus Gateway User Manual
Page 19