Installation Reference - TECOM AG-300 Plus User Manual

Installation Reference

11.
11-1 Vertical
When the vibration gauge is installed in the vertical direction, it should be placed just above
the rotating shaft. At this time, the Z-axis of the vibration gauge is the vertical direction.
Please note that the two legs of the magnet are parallel to the rotating shaft so that they can
be fixed on the arc surface of the motor on.
AG-300 Plus Gateway User Manual
Page
Z
Y
X
X
Z
X
When using the
position, the figure
measured correct X, Y, Z vibration axis.
16
Z
Y
X
X
Z
X
Y
X
Y
X
vertical installation
represents the