Tt-300 Settings - TECOM AG-300 Plus User Manual

(Emergency shutdowns function: When an emergency alarm occurs, the user controls the
APP to make the AG300 through Digital Output signal to the alarm device shutdown).
Digital Output please refers to Note for wiring.
When the setting is complete, click the 【Save】button below.
Back to【 RS485 】manual, click where you want to select an item (motor, Switchgear)
check the "v", then click on the 【Edit 】button, enter the individual sensors (TT-300,
VB-200, PM300 ...) page.

TT-300 Settings

4.
The TT-300 itself
representing RS485 ID 0 ~ 15 (please refer to Section 8 of the device settings). Please set
the RS485 ID of Gateway AG-300 Plus with the corresponding TT-300 to the same RS485 ID.
AG-300 Plus Gateway User Manual
is designed with
Page
4-digit DIP switches
24
v
on the hardware,