Scan gateway neighboring APs for information
Click "Connect" to connect the AP; data of the latter are not saved (data lost after gateway
restarted).
Click "Rescan to scan" neighboring APs once again. Scanning may fail to identify all APs
when there are many available nearby; rescan couple of times may be needed in case like this.
Click the "Add profile" button to save AP data in station profile file.
Hardware Settings
8.
A. TT-300
Please RS485 ID should be unique, please follow the following table to set up the RS485 ID
of TT-300s:
AG-300 Plus Gateway User Manual
RS485
ID
Switch
Page
42