Electromechanical Equipment Configuration - TECOM AG-300 Plus User Manual

- Password: Please enter your personal password (recommended account number). - When the
setting is completed, click the 【Save】button below.
- Please click the【Start Pairing】to complete the account settings.

Electromechanical equipment configuration

3.
Step 1
- Click on the left main menu to use the 【Settings】 【RS485 】 .
- On the right RS485 select the motor or switchboard, then click Add. - The
following is a motor example for reference.
AG-300 Plus Gateway User Manual
Page 22