Installation; Mounting - ProLights PIXIEWASHXB User Manual

6

- 2 - INSTALLATION

2.1 MOUNTING

The PIXIEWASHXB may be set up on a solid and even surface. By means of the fixing facilities of the base-
plate, the unit can also be mounted upside down to a cross arm. The base plate is shown in fig.3. For fixing,
stable mounting clips are required. According to the figure, the bolts of the brackets are placed into the
openings provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that
the unit is firmly fixed to avoid vibration and slipping while operating. The mounting place must be of
sufficient stability and be able to support a weight of 10 times of the unit's weight. When carrying out any
installation, always comply scrupulously with all the regulations (particularly regarding safety) currently
in force in the country in which the fixture's being used. Always additionally secure the projector with the
safety rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the
maximum fall of the projector will be 20 cm.
PIXIEWASHXB
CLAMPS
OMEGA
BRACKETS
SAFETY
CABLE
Fig.3