Seat Height And Seat Angle - Vermeiren Inovys Series Installation Manual

EN
NL

Seat height and seat angle

3.2
The seat height of the Inovys wheelchair is adjustable in 3 positions in steps of 35 mm. To
adjust the seat height, the following connection points (located below the seat frame) need
PL
to be repositioned:
CS

at front tube (A), connection of base frame and seat-frame support (10);

at base-frame support (B), connection of base frame and seat-inclination motor (11);

at rear-wheel mounting plate (C), connection of base frame and seat-frame support
(12).
To adjust the height:
1. Remove the socket screw and nut for item (10), (11) and (12) and collect the spacers.
2. Mount item (10+12) with the spacers in one of the adjustment holes:
In lowest position (460 mm), in hole no. 1;
o
In medium position (495 mm), in hole no. 2;
o
In highest position (530 mm), in hole no. 3.
o
3. Tighten socket screws and nuts firmly.
4. Repeat adjustments (A) and (C) at the other side of the wheelchair.
5. Mount item (11) with spacers in one of the holes at location (B), according to the same
hole selection made for item (10+12).
6. Tighten socket screws and nuts firmly.
A
10
B
11
A
3
2
3
1
2
B
1
Installation manual
3
2
1
C
- 6 -
Inovys wheelchairs
2019-02
Adjustments
12
C