Limitations; Preparation For Installation - Network Technologies XTENDEX Series Installation And Operation Manual

NTI XTENDEX DVI Video Extender

LIMITATIONS

•
Hot-plugging of monitors is supported provided monitors were originally connected at power-up.
•
CAT5 shielded cables are not recommended for use with this extender.

PREPARATION FOR INSTALLATION

•
Locations should be chosen for the monitors that also have space to connect the Remote and Local units within the distance
provided by the cables.
•
The CAT5 cables must be run to the locations where the Remote and Local units will be connected. Be careful to route the
cables away from any sources of magnetic fields or electrical interference that might reduce the quality of the video signal
(i.e. AC motors, welding equipment, fluorescent lighting, etc.).
•
All cables should be installed in such a way that they do not cause stress on their connections to the equipment. Extended
lengths of cable hanging from a connection may interfere with the quality of that connection.
minimize this.
•
Properly shut down and disconnect the power from the video source and monitors to be separated.
involved whose connections are being interrupted, be sure to refer to the instruction manuals for that equipment for proper
disconnection and re-connection procedures before proceeding.
DVI-D-MM-S-2M
Cable
Digital Video
Source
If extension cables are needed, contact NTI for the cables required.
ST-C5DVI-150
CAT5 Cable
Local
(supplied)
CAT5 Cable
Unit
AC
adapter
(supplied)
DVI-IS-xx-MM
Cable
Digital
Multi-Scan
Monitor
Local User
TYPICAL APPLICATION
ST-C5DVI-150
Remote
Unit
Up to 150 Feet
DVI-IS-xx-MM
Cable
Digital
Multi-Scan
Monitor
Remote User
3
Secure cables as needed to
If other equipment is