Hyundai Yanmar TNV Series Manual page 136

36
―― 7. Main Menu
7）Sampling Setting sub-window
Clicking the button on the Operation tool bar enables the sampling frequency setting operation.
① ：Select a sampling frequency by checkmarking one of the buttons.
Select
② / ： These buttons are available when you select the radio button that lets you enter any value.
You can increase/decrease the sampling frequency in steps of 1, 10, or 100.
③ ：Select a unit.
Unit
④ ：Sets the entered information.
Set
⑤ ：Cancels the entered information..
CANCEL
Figure 7-19 ［Data Logging］-［Data Monitor］-［Sampling Setting］Sub-Window Screen
8）Overview of data sampling operation
① Set item names you want to display....... 4） 、5）
② Set the trigger conditions as necessary.（If you do not set them, you can forcibly start recording by
clicking the Manual Trigger button.）......6）
③ Click.......1）③
④ When a trigger is generated（or the Manual Trigger button is clicked） ，Preservation is displayed in the
Status field of "Preservation status."......4）⑧
⑤ When you click
the Status field of "Preservation status" and the reception stops.
⑥ As necessary, you can check the graph or save data in a file.
①
to stop receiving data manually or the buffer becomes full, Completion is displayed in
② ④ ③ ⑤