Hyundai Yanmar TNV Series Manual page 109

3）System settings
The following screen lets you set the conditions of communication with the ECU, including ECU's hardware
address number, communication speed, and other conditions. Note that this function is included also in the
tool function of the diagnostic software.
① ： Set the CAN communication speed（baud rate） ．The standard setting for marine
Data Rate
applications is 250k, and that for land applications is 500k. For some models, the baud
rates are changed. Refer to the specification document.
② ： Set ECU's physical address. Usually, it is 0. When multiple ECU's are connected to one
Address
CAN line, you need to change the address.
③ Training Mode ：When you want to use training mode, click this button.
④ System Setting ： This button provides the same function as the one called by choosing［Tool］-［System
Setting］on the main screen.（Refer to Section 11.1）
⑤ ：Displays the hardware and software versions of the tool software, interface box, etc.
Version
⑥ ：Clicking this button closes the setting screen.
Exit
①
②
③
④
⑤
⑥
5. Starting/Quitting the Software ――
Figure 5-3 System Setting Screen
9