Hyundai Yanmar TNV Series Manual page 133

3）Additional Information view
（i）Trigger Setting
Displays trigger setting information.
① Manual Trigger
② ：Displays the trigger setting status.
Trigger
③ ：Displays the acronym of data for which a trigger is set.
Data
④ ：Displays the threshold value of the trigger setting.
Level
⑤ ：Displays the type of the set trigger（rising edge or falling edge） ．
Type
⑥ ：Shows the number of data points between the start of storage and the trigger.
Delay
⑦ ： Shows the number of data points to be stored（a single point means a set of data items
Storage
at a certain point of time） ．
（ii）Preservation status
Displays the data logging status.
⑧ ： Displays the status："Display" during waiting for a trigger, "Preservation" during storing
Status
data, or "Completion" at the completion of measurement.
⑨ ：Displays the number of acquired data points.
Counter
⑩ ：Displays the time when monitoring starts.
Mon. Start
⑪ ：Displays the elapsed time from the start of measurement.
Run
⑫ ：Displays the remaining time until the end of measurement.
Rest
（iii）Sampling setting
Displays the sampling setting status.
⑬ ： Displays "Intermittence" when the sampling frequency setting is 100 msec or "Polling" for
Mode
other settings.
⑭ ：Displays the sampling frequency.
Interval
：Lets you generate a trigger manually.
Figure 7-16 ［Data Logging］-［Data Monitor］Screen
7. Main Menu ――
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
33