Lincoln Electric FLEX FEED 74 HT Operator's Manual page 28

FLEX FEED™ 74 HT
24b. To reassemble the door for left hand operation:
a. Place the pressure arms on the door in the
orientation as shown.
b. Slide the rod through the door and through the
springs.
c. Assemble the socket head cap screws and
indicator, tightening the indicator screw to a
height of .27" and the other screw to .34".
d. Assemble the washers and pressure knob.
e. Assemble the door insert.
(e)
DOOR INSERT
AND SCREW
(a)
PRESSURE ARMS
SPRINGS
FIGURE A.38
(b)
SLIDE ROD
THROUGH SPRINGS
(c)
SOCKET HEAD
CAP SCREW
(d)
SOCKET HEAD CAP SCREW
SCREWS INTO THIS INDICATOR
WASHERS WITH
PRESSURE KNOB
A-21
INSTALLATION
(c)
.34"
LEFT HAND
ASSEMBLY
(c)
.27"