Lincoln Electric FLEX FEED 74 HT Operator's Manual page 26

FLEX FEED™ 74 HT
20. Swap the location of the plug button and the 5 pin
trigger connection on the front of the feeder, then
reassemble the user interface.
21. Reassemble the gas solenoid and plug button to the
rear of the feeder.
22. Reassemble the case sides and roof to the feeder,
taking care to route the gas line and electrode sense
lead through the case side opening by the rear of the
motor gearbox.
23. Reassemble the feed plate to the gear box and secure
by tightening the socket head cap screw.
FIGURE A.34
PLUG
BUTTON
5 PIN TRIGGER
CONNECTOR
FIGURE A.35
FIGURE A.36
SOCKET HEAD CAP SCREW
A-19
67 ELECTRODE
SENSE LEAD
GAS HOSE
INSTALLATION