FLEX FEED™ 74 HT
14. Place the motor gearbox assembly in the case with
the drive facing the left side. Secure with (4) screws.
15. Reassemble the upper motor support with plastic
washers on the appropriate side.
16. To move the Cold Feed/Gas Purge rocker switch from
the right side to the left side, remove the leads from
the switch. Squeeze the snaps holding the switch to
the sheet metal and push the switch outwards.
Reassemble the switch on the left side
FIGURE A.30
FIGURE A.31
559
515
515C
559
A-17
INSTALLATION