Lincoln Electric FLEX FEED 74 HT Operator's Manual page 25

FLEX FEED™ 74 HT
17. If present, reassemble the Gouge/Wire Feed switch
on the opposite side.
18. Remove the (4) screws holding the user interface to
gain access to the inside front compartment of the
feeder.
19. Move the thermal LED from right to the left hand side.
Gently pull on the black body of the LED holder to
separate it from the clear lens.
FIGURE A.32
552F
522
515E
515F
FIGURE A.33
A-18
515G
INSTALLATION