Lincoln Electric FLEX FEED 74 HT Operator's Manual page 22

FLEX FEED™ 74 HT
8. Remove the (4) screws securing the roof with a 5/16"
nut driver. Remove the remaining (2) screws securing
each case side.
FIGURE A.24
9. Remove the lock-nut holding the gas solenoid. Leave
the gas hose and leads connected to the gas solenoid.
Remove the plug button from the rear opposite the gas
solenoid.
FIGURE A.25
10. Remove the upper motor support. Use a 5/16" nut
driver to remove the (2) screws at the rear and the (2)
screws at the front. Use a 3/8" wrench to remove the
(3) screws holding the support to the gearbox.
11. Remove the (4) screws holding the motor gearbox
assembly to the case and lift out the motor gearbox.
A-15
INSTALLATION
FIGURE A.26
FIGURE A.27