Lincoln Electric FLEX FEED 74 HT Operator's Manual page 16

FLEX FEED™ 74 HT
GUN ADAPTERS:
K3348-1 OXO
K3349-1 FASTMATE
• Using the Oxo or FastMate gun adapters requires a
K3344-1 Standard #4 gun adapter to be installed in the
wire drive.
1. Turn power OFF at the welding power source.
2. Using a Phillips screw driver, loosen the screw securing
the gun adapter cover. Remove the gun adapter cover.
GUN
ADAPTER
COVER
3. With a 3/4" wrench, remove the bolt holding the
electrode lead to the gun adapter.
FIGURE A.10
SCREW
FIGURE A.11
BOLT
A-9
ELECTRODE
LEAD
INSTALLATION