Lincoln Electric FLEX FEED 74 HT Operator's Manual page 15

FLEX FEED™ 74 HT
8. Assemble the sense lead to the new gun adapter.
Orient the lead to towards the rear of the gun adapter.
9. If required, assemble the gas hose to the gun adapter
or the fitting on the feed plate and secure with a hose
clamp.
10. Assemble the gun adapter to the wire drive. Tighten
the set screw once the gun adapter is at a 90° angle.
11. Bolt the electrode lead to the gun adapter, making
sure to route the lead straight down.
FIGURE A.8
BOLT
12. Assemble the gun adapter cover and secure with the
screw.
FIGURE A.9
GUN
ADAPTER
COVER
ELECTRODE
LEAD
SCREW
A-8
KEEP TERMINAL AND
LEAD VERTICAL.
INSTALLATION