General Specifications; Ambient Conditions And Standards - TDE MACNO DVS200 User Manual

3.3. General specifications

3.3.1. Ambient conditions and standards

T Ambient temperature
A
Installation location
Installation altitude
Temperature:
Air humidity:
Air pressure:
General standards
Safety
Climatic conditions
Clearance and creepage
Vibration
EMC compatibility
Rated input voltages
Protection degree
Approvals
1)
2)
16 • Chapter 3 - Description, Components and Specifications
Table 3.3.1.1: Ambient conditions and standards
E N V I R O N M E N T
[°C]
[°F]
Pollution degree 2 or better (free from direct sunligth, vibration, dust,
corrosive or inflammable gases, fog, vapour oil and dripped water, avoid
Up to 1000 m (3281 feet) above sea level; for higher altitudes a current
reduction of 1.2% for every 100 m (328 feet) of additional height applies .
1)
operation
2)
operation
storage -25...+55°C (-13...+131°F), class 1K4 per EN50178
-20...+55°C (-4...+131°F), for devices with keypad
transport -25...+70°C (-13...+158°F), class 2K3 per EN50178
-20...+60°C (-4...+140°F), for devices with keypad
5 % to 85 %, 1 g/m
operation
storage
5% to 95 %, 1 g/m
transport
A light condensation of moisture may occur for a short time occasionally if the device
operation [kPa]
storage [kPa]
transport [kPa]
S T A N D A R D
EN 60721-3-3, class 3K3. EN 60068-2-2, test Bd.
EN 50178, UL508C, UL840. Overvoltage category for mains connected
EN61800-3 (see "EMC Guidelines" instruction book)
IP54 for the cabinet with externally mounted heatsink; only for
sizes 1007... 3150 (230V...480V) and 2002 ... 3020 (575V)
0 ... +40; +40...+50 with derating
32 ... +104; +104...+122 with derating
saline environment)
0...40°C (32°...104°F)
0...50°C (32°...122°F)
3 3
to 25 g/m without moisture condensation or icing
(Class 3K3 as per EN50178)
3 3
to 29 g/m (Class 1K3 as per EN50178)
3)
95 % 60 g/m
is not in operation (class 2K3 as per EN50178)
86 to 106 (class 3K3 as per EN50178)
86 to 106 (class 1K4 as per EN50178)
70 to 106 (class 2K3 as per EN50178)
EN 61800-1, IEC 143-1-1.
EN 50178, UL 508C
circuits: III; degree of pollution 2
EN 60068-2-6, test Fc.
IEC 60038
IP20 according to EN 60529
CE, UL, cUL
4)
TGy0020
User Manual