Table of Contents
Advertisement
9-1 SWITCH UNIT AND COIN METER
Never touch places other than those specified. Touching places not specified can
cause electric shock and short circuit accidents.
Be careful that a finger or hand does not get caught when opening/closing the coin
chute door.
• When you enter the Test Mode, fractional coin and bonus adder data is erased.
• Adjust the sound to the optimum volume, taking into consideration the
environmental requirements of the installation location.
SWITCH UNIT
Open the coin door, and the switch unit will appear. (Location of switch unit is different place depend of you cabinet)
The functioning of each SW is as follows:
TEST Button (TEST):
Enter in SYSTEM menu. It is used as a cursor move button in System menu.
SERVICE Button (SERVICE):
Insert a credit for service without turning up a coin meter. It is used as Select Button in System menu.
COIN METER
Open the Coin Door by using the key to have the Coin Counter appear. (Location of Coin meter unit is different
place depend of you cabinet)
9
23
Advertisement
Table of Contents
