Table of Contents
Advertisement
6
ASSEMBLY AND INSTALLATION
• Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock.
• Perform assembling as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specified performance.
• When assembling, more than one person is required. Depending on the assembly
work, there are some cases in which working by one person alone can cause
personal injury or parts damage.
• Ensure that connectors are properly connected. Improper connections can cause
electric shock.
• This work should be carried out by the site maintenance personnel or other
qualified professionals. Work performed by non-technical personnel can cause
a severe accident such as electric shock. Failing to comply with this instruction
can cause a severe accident such as electric shock to the player during
operation. If no one with proper technological expertise is available, request
service from the office indicated in this document or the point of purchase so as
to ensure safety.
• Provide sufficient space so that assembling can be performed. Performing work
in places with narrow space or low ceiling may cause an accident and assembly
work to be difficult.
• To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.
• Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a risk of fire.
• Do not leave power cords, ground wires, or network cables exposed in areas
of heavy foot traffic. Doing so may cause them to become damaged, possibly
resulting in electric shock and/or short circuits. When laying wiring across the
floor, always use safety covers to protect the wires.
• The power cord for this product has a ground terminal. Make sure to use this
ground terminal when plugging it in to an indoor outlet. Failure to properly
ground the product could lead to electrocution. It can also lead to malfunction.
6
9
Advertisement
Table of Contents
