Operating A Cable Box Or Satellite Receiver (Sat) - Sony KP-48V80 Service Manual

KP-48V80/53V80/61V80
RM-Y905 RM-Y905 RM-Y905
Operating Video Equipment (continued)
DVD Player manufacturer code
numbers
Manufacturer
Sony
Panasonic
Pioneer
RCA
Toshiba
Tips z
• In some rare cases, you may not be able to operate
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment's own remote control.
• When you remove the batteries, the code number may
revert to the factory setting.
To operate video equipment
1
Set the VTR1/2/3/DVD/MDP switch to
the input through which you would like to
access your video equipment.
2
Press DVD/VTR (FUNCTION).
3
Use the VCR/DVD/MDP operation
buttons indicated in the following tables.
5 2

Operating a Cable Box or Satellite Receiver (SAT)

Setting the Manufacturer's
Code
You can program the supplied remote control
to operate a cable box or satellite receiver.
Press CODE SET, SAT/CABLE
(FUNCTION), and the 0-9 buttons to enter
the manufacturer's code number (see the
following chart), then press ENTER.
For example, to operate a Sony satellite
receiver:
FUNCTION
CODE SET
SAT/CABLE
8
Manufacturer code numbers
(cable box)
Manufacturer
Hamlin/Regal
Jerrold/G. I.
Oak
Panasonic
Pioneer
Scientific Atlanta
Tocom
Zenith
Operating a VCR using the remote control
To turn On/Off
Code
To select a channel
751
753
To change channels
752
To record
755
754
To play
To stop
To fast forward
To rewind the tape
To pause
To search the
picture forward or
backward
To change input
mode
Operating an MDP using the remote
control
To turn On/Off
To play
To stop
To pause
Manufacturer code numbers
(satellite receiver)
Manufacturer
Sony
Geneal Electric
Hitachi
Hughes
Panasonic
RCA/PROSCAN
Toshiba
To operate the cable box or
satellite receiver (SAT)
ENTER
0 1
1
Press SAT/CABLE (POWER) [Green
Button] to turn on/off the cable box or
satellite receiver.
2
Press SAT/CABLE (FUNCTION).
3
For other operations, refer to the
operating instructions that come with the
Code
equipment.
222, 223, 224, 225, 226
The GUIDE and INDEX (blue-labeled)
201, 202, 203, 204, 205,
222, 206, 207, 208, 218
buttons can be used only with a satellite
227, 228, 229
receiver.
219, 220, 221
214, 215
If the remote control doesn't work
209, 210, 211
216, 217
• Try repeating the set up procedures using
212, 213
the other codes listed for your equipment.
To search the picture
forward or backward
Press DVD/VTR (POWER).
[Green Button]
To search a chapter
Press the 0 – 9 buttons.
forward or backward
Press CH +/–.
Press while
Operating a DVD Player using the remote
pressing (REC) (upper).
control
Press (.
To turn On/Off
Press p.
Press ).
To play
Press 0.
To stop
Press P. Press again to
To pause
resume normal playback.
Press ) or 0 during
To step through
playback. Release to
different tracks of
resume normal playback.
an audio disc
Press TV/VTR.
To step through
different chapters
of a video disc
To display the Title
menu
Press DVD/VTR (POWER). To select DVD
multilingual sound
[Green Button]
Press (. To display the DVD
menu
Press p.
To select tracks
Press P. Press again to
directly
resume normal playback.
To display the
menu (Set up)
To operate the projection TV
Press TV (FUNCTION). Then use the
projection TV control buttons to control the
Code number
projection TV.
801 (preset code for
remote control)
802, 808
805
Tips z
804
803
• If more than one code number is listed, try entering
802
806, 807
• If you enter a new code number, the code number you
• In some rare cases, you may not be able to operate
• Whenever you remove the batteries — to replace
– 34 –
Press ) or 0 during
playback. Release to resume
normal playback.
Press CH +/–.
Press DVD/VTR (POWER).
[Green Button]
Press (.
Press p.
Press P. Press again to
resume normal playback.
Press ) to step forward or
0 to step backward.
Press CH + to step forward
or CH – to step backward.
Press TITLE.
Press AUDIO repeatedly.
[Pink Labeled Button]
Press DVD MENU.
Press 0-9 buttons.
Press MENU.
them one by one until you come to the correct code for
your equipment.
previously entered at that setting is erased.
your equipment with the supplied remote control. In
this case, use the equipment's own remote control
unit.
them, for example — if too much time is taken, the
code numbers may revert to the factory setting and
must be reset.
5 3