Engine Bottom End Disassembly - Polaris TRAIL BOSS 325 2001 Manual

ENGINE BOTTOM END DISASSEMBLY

CYLINDER REMOVAL
Follow engine disassembly procedures to remove valve
cover, camshaft and rocker arms, and cylinder head.
1. Remove cam chain guide at front of cylinder.
2. Remove the two 6 mm cylinder base bolts.
3. Tap cylinder lightly with a plastic hammer in the
reinforced areas only until loose.
4. Rock cylinder forward and backward and lift it from the
crankcase, supporting piston and connecting rod.
Support piston with piston support block PN 2870390.
5. Remove dowel pins from crankcase.
ENGINE
3.31