Polaris TRAIL BOSS 325 2001 Manual page 189

DRIVEN CLUTCH DISASSEMBLY / INSPECTION, CONT.
5. Check alignment of tabs on spring. Replace the
spring if tabs are misaligned or the spring coils are
distorted.
6. Inspect ramp buttons in the moveable sheave and
replace if worn. NOTE: The ramp buttons are
secured by Torx¥ screws (T20).
7. Remove moveable sheave and note the number of
spacer washers.
between the sheaves when adjusting belt
deflection.
One spacer must remain
Tabs Aligned
Belt deflection adjustment
washers
CLUTCH
6.27