Polaris TRAIL BOSS 325 2001 Manual page 117

STATOR INSTALLATION, CONT.
4. Torque bolts evenly to specification.
Stator Plate Bolt Torque:
5-6.5 ft. lbs. (7-9 Nm)
5. Seal stator wire grommet with 3 Bond 1215 (P/N
2871557).
FLYWHEEL INSTALLATION
1. Install flywheel, washer, and nut. Torque flywheel
to specification.
Flywheel Nut Torque:
58-72 ft. lbs. (78-98 Nm)
STARTER DRIVE
1. Be sure the washer is positioned on the back of
the drive gear.
2. Apply starter drive grease (P/N 2871460) to the
drive bushing in the crankcase and all moving
surfaces of the starter drive mechanism. Install
the starter drive.
3. Install recoil housing gasket and recoil housing.
Starter Drive Grease:
PN 2871460
ENGINE
3.61