HP 2920 Series Multicast And Routing Manual page 29

xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
VLAN ID: 200
VLAN Name: client vlan
IGMP Version: 2
Querier Address:
Querier Port: 4 <only displayed when not querier>
Querier Up Time:
Querier Expiry Time:
Ports with multicast routers:
Active Group Addresses
----------------------------+----+--------------------------------
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
show ip igmp vlan 200
IGMP Service Protocol Info
Total VLAN s with IGMP enabled:
Current count of Multicast groups joined:
VLAN ID: 200
VLAN Name: client vlan
IGMP Version: 2
Querier Address:
Querier Port: 4 <only displayed when not querier>
Querier Up Time:
Querier Expiry Time:
Ports with multicast routers:
Active Group Addresses
----------------------------+----+--------------------------------
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Syntax:
show ip igmp config
Global command listing IGMP status for all VLANs configured in the switch.
IGMP Service Config
Control unknown multicast [Yes]: Yes
Forced fast leave timeout [0]: 0
Delayed flush timeout [0]: 0
VLAN ID|VLAN NAME
-------+--------------------------------+-----------+----------------------
1 |DEFAULT_VLAN
200 |client vlan
300 |Data Centre
Syntax:
show ip igmp vlan <vlan> config
|std |
|filt| 23min 3sec | A1-B3, C4
|filt| 23min 10sec| A1,B2,C5
|filt|
10.0.102.204
1hr 53min 2sec
2min 1sec
A1, A3-A5
|Type| Expires
|filt|
|std |
|filt| 23min 3sec | A1-B3, C4
|stat|
|filt|
33
10.0.102.204
1hr 53min 2sec
2min 1sec
A1, A3-A5
|Type| Expires
|filt|
|std |
|filt| 23min 3sec | A1-B3, C4
|stat|
|filt|
|IGMP Enabled|Querier Allowed | Querier Interval |
|No |Yes
|Yes |No
|Yes |Yes
3min 2sec | all
2min 5sec | F22
| Ports
1min 2sec | A1
3min 2sec | all
0min 0sec | A1,B2,C5
2min 5sec | F22
21
| Ports
1min 2sec | A1
3min 2sec | all
0min 0sec | A1,B2,C5
2min 5sec | F22
|
|
|
125 |
125 |
125 |
IGMP V2 NG Overview 29