HP 2920 Series Multicast And Routing Manual page 33

Syntax:
show ip igmp groups
Shows VLAN-ID, uptime, expiration time, multicast filter type.
Output:
IGMP Group Address Information
VLAN ID Group Address Expires
------- ------------- --------- -------- --------------- + -----
Syntax:
show ip igmp config
Shows IGMP configuration information.
Output:
IGMP Service Config
Control unknown multicast [Yes] : Yes
Forced fast leave timeout [0] : 4
Delayed flush timeout [0] : 0
VLAN ID VLAN Name
------- ------------ ------------ --------------- ----------------
1 DEFAULT_VLAN No
Syntax:
show ip igmp statistics
Shows IGMP statistical information.
Output:
Total VLANs with IGMP enabled
Current count of multicast groups joined : 0
IGMP Joined Groups Statistics
VLAN ID VLAN Name
------- -------------------------------- ------ -------- -------- ------
1 DEFAULT_VLAN
Syntax:
show ip igmp vlan <ID>
Usage:
show ip igmp [config|group IP-ADDR|groups vlan
<VLAN-ID>|statistics|VLAN-
Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are
disabled displays the global IGMP status.
When followed by the config keyword, shows IGMP global configuration
information.
When followed by statistics keyword shows igmp statistical information.
VLAN-ID can be used to get operational, statistical, and configuration information
for a particular VLAN (if VLAN support is enabled).
UpTime
IGMP Enabled Querier Allowed Querier Interval
Yes
Last Reporter | Type
125
: 0
Total Filtered Standard Static
0 0 0
Help function commands
0
33