Invertek Compact 2 Series User Manual page 32

8.3.4. Macro Functions - User PI Control Mode (P-12 = 5 or 6)
P-15 DI1
0 1
0 STOP ENABLE
1 STOP ENABLE
3, 7 STOP ENABLE
START 
4 (NO)
START 
5 (NO)
START 
6 (NO)
8 STOP RUN
14 STOP RUN
15 STOP RUN
16 STOP RUN
17 STOP RUN
18 STOP RUN

For information on the External Trip (E-TRIP) and motor thermistor monitoring function, see section 6.7 Motor Thermistor Connection.

Fire Mode input logic (Normally Open or Normally Closed) and latching mode are selected by P-30. When the input mode is set to latched,
the enable signal must be removed to reset the latch.
32
Optidrive Compact-2 Engineering Guide Issue 07.docx
DI2
0 1
PI REF P-20 REF
PI REF AI1 REF
PI REF P-20
STOP 
(NC)
STOP 
(NC)
STOP 
(NC)
FWD  REV 
- -
P-23 REF PI REF
P-23 REF P-21 REF
P-21 REF P-23 REF
AI1 REF PI REF
2,9,10,11,12,13 = 0
www.invertekdrives.com
DI3 / AI2
0 1
Analog Input AI2
Analog Input AI2 (PI FB)
E-TRIP 
(NC) Analog Input AI1 (PI FB)
Analog Input AI2 (PI FB)
PI REF P-20 REF Analog Input AI1 (PI FB)
E-TRIP 
(NC) Analog Input AI1 (PI FB)
Analog Input AI2 (PI FB)
E-TRIP 
(NC) Analog Input AI1 (PI FB)
Fire Mode Analog Input AI1 (PI FB)
Fire Mode Analog Input AI1 (PI FB)
Fire Mode Analog Input AI1 (PI FB)
Fire Mode
DI4 / AI1 Diagram
0 1
Analog Input AI1 4
Analog Input AI1 4
3
Analog Input AI1 12
5
Analog Input AI1 4
16
1
1
1
Analog Input AI1 1