IGLOO2 FPGA DSP FIR Filter
3.
Filter Generation: Two options are provided for generating the filter coefficients:
•
Generate the coefficients using MATLAB or any similar tool and save it as a text file (Refer to
"Appendix: Coefficient Text File Format" on page 32
be used to browse and load this file. Refer to
Figure 11 • Filter Generation - 1
for the format of the text file). The GUI can
Figure
11.
Revision 6
18
Need help?
Do you have a question about the IGLOO2 FPGA DSP FIR Filter and is the answer not in the manual?