Procedure - Configure Outputs - Emerson Rosemount MCL-220 Manual

Programming the transmitter
Ranging an
output
6.3.3

Procedure - configure outputs

Complete the following steps to configure the analog current outputs.
1.
2.
3.
4.
30
and live. Fixed means the selected output goes to the previously
programmed value (between 0.00 and 22.00 mA) when a fault occurs.
Live means the selected output is unaffected when the fault occurs.
The outputs are fully rangeable, including negative numbers. If the
output is logarithmic, assigned values must be positive.
Press MENU.
The main Menu screen appears.
Move the cursor to Program and press ENTER.
The cursor is on Outputs.
Press ENTER.
Choose Configure.
Rosemount MCL