Table of Contents
Advertisement
1
About these instructions
These instructions describe the commissioning of the CODESYS 3 programmable Turck devices as
PROFINET Controller and PROFINET Device on the example of the compact controller TBEN-L...-
PLC-10.
The instructions are valid for the following devices:
PROFINET Controller
PROFINET Device
1.1
Target Groups
These instructions are aimed at qualified personnel and must be carefully read by anyone mount-
ing, commissioning, operating, maintaining, dismantling or disposing of the device.
1.2
Explanation of Symbols
The following symbols are used in these instructions:
CALL TO ACTION
This symbol identifies steps that the user has to perform.
RESULTS OF ACTION
This symbol identifies relevant results of steps
2017/06
Compact controller
TBEN-L...-PLC-...
✔
✔
DANGER!
DANGER indicates an immediately dangerous situation, with high risk, the death or severe
injury, if not avoided.
WARNING!
WARNING indicates a potentially dangerous situation with medium risk, the death or
severe injury, if not avoided.
ATTENTION!
ATTENTION indicates a situation that may lead to property damage, if it is not avoided.
NOTE
In NOTES you find tips, recommendations and important information. The notes facilitate
work, provide more information on specific actions and help to avoid overtime by not fol-
lowing the correct procedure.
Programmable
HMI/PLC
gateways
BL20-PG-EN-V3/
TX500 series
BL67-PG-EN-V3
✔
–
✔
–
3
- Quick Links:
- Installing a Codesys Package
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CODESYS 3 and is the answer not in the manual?
Questions and answers