Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for turck TX700S
Summary of Contents for turck TX700S
- Page 1 TX700S/D/Q PLC and IIoT Edge Controller Instructions for Use...
-
Page 2: Table Of Contents
Slot assignment – serial interfaces.................. 20 Commissioning.......................... 21 Charging the battery.................... 21 Initial commissioning.................... 21 7.2.1 User management ........................ 21 Web server login ...................... 22 V03.00 | 2024/03 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 3 12 Disposal.............................. 34 13 Technical data........................... 35 14 Appendix: approvals and markings ..................... 37 15 Turck branches — contact data .................... 38 V03.00 | 2024/03 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 4: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V03.00 | 2024/03 | 4 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 5: Notes On The Product
Type designation TX700Q 100009355 Year/week of production A2412 Internal version ID of the product V.: … Serial number S.N.: AA…AA V03.00 | 2024/03 | 5 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 6: Type Code
Power supply connector Connector for serial interface Quick Start Guide Turck service Turck supports you in your projects – from the initial analysis right through to the commission- ing of your application. The Turck product database at www.turck.com offers you several soft- ware tools for programming, configuring or commissioning, as well as data sheets and CAD files in many export formats. -
Page 7: For Your Safety
The product is designed according to state of the art technology. Residual hazards, however, still exist. Observe the following safety instructions and warnings in order to prevent danger to persons and property. Turck accepts no liability for damage caused by failure to observe these safety instructions. -
Page 8: Note On Explosion Protection (Usa And Canada Only)
Observe the permissible ambient temperature depending on the temperature class [} 37]. V03.00 | 2024/03 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Product Description
Product description The device is designed in protection class IP20. For the connection to Ethernet, two (TX700S) or three (TX700D and TX700Q) Ethernet ports are available. The serial port is used to communicate with a PLC or with field devices with RS232 or RS485 interface. -
Page 10: Device Overview
TX VisuPro HMI protocols for connecting control systems of all common manufactuers Optional extension modules for I/Os and further communication interfaces V03.00 | 2024/03 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 11: Functions And Operating Modes
Specification Format FAT, FAT32 Max. size Limited by FAT32 specifications ≤ 4 GB for a single file ≤ 32 GB V03.00 | 2024/03 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 12: Accessories
2.4 GHz and 5 GHz 100010167 TX-DP-S PROFIBUS-DP slave, 12 Mbaud 4.4.2 Power supply Type Description 100002938 TX-PSC TX power supply onnector V03.00 | 2024/03 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 13: Installing
Installing plug-in modules Fig. 5: Installing plug-in modules Fig. 6: Installing plug-in modules (e. g. TX-CAN, TX-IO-DX06) (e. g. TX-IO-XX03) V03.00 | 2024/03 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 14: Grounding The Device
(1 MΩ resistor with 4.7 nF capacitor connected in parallel). „ The power supply must have double or reinforced insulation. Fig. 7: Power supply – wiring V03.00 | 2024/03 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 15: Connecting
Ethernet port 1 (10/100 Mbps) Ethernet port 0 (10/100 Mbps) USB ports, V2.0, max. 500 mA Expansion slot for plug-in modules SD card slot V03.00 | 2024/03 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 16: Connecting Tx700D/Q
Ethernet port 1 (10/100 Mbps) Serial interface Ethernet port 0 (10/100 Mbps) Power supply 2 extension slots for plug-in modules SD card slot V03.00 | 2024/03 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 17: Connecting The Power Supply
The power connector is part of the scope of delivery and can be ordered as spare part [} 12]. Connecting the device to Ethernet The TX700S have two and the TX700D and TX700Q three RJ45 Fast Ethernet sockets for the connection to Ethernet. „... -
Page 18: Connecting External Devices To The Serial Interface
To operate in RS485, pins 1 and 2 as well as pins 3 and 4 must be connected extern- ally. V03.00 | 2024/03 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 19: Connecting Plug-In Modules
TX-RS485 RS485/RS422 Serial and TX700Q TX-RS232 RS232 Serial TX-IO-DX06 Compact I/O TX-IO-XX03 Multifunction TX700S: TX-EXTEND or other extension module necessary V03.00 | 2024/03 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 20: Slot Assignment - Can Port
Mode COM3 COM Port 3 Slot 1 to Slot 4 refer to the extension slots on the rear of the device. V03.00 | 2024/03 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 21: Commissioning
Initial commissioning The IP address of Ethernet port ETH1 is set to 192.168.1.254 by default. The web server (System Settings) can be opened via this IP address using a web browser, the Turck Automation Suite (TAS) or the Turck Service Tool. -
Page 22: Web Server Login
IP address for Ethernet port ETH1 has already been changed, than the current IP address of the port is entered here. V03.00 | 2024/03 | 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 23: Setting The Ip Address
The IP addresses of the device can be set via the web server of the device. The IP address via which the device is connected to the PC via Ethernet can also be set via the Turck Service Tool or via the Turck Automation Suite (TAS). -
Page 24: Setting The Ip Address Via Turck Service Tool
Turck Service Tool shows the connected devices. NOTE Clicking the device's IP address opens the web server. Fig. 19: Turck Service Tool – found devices V03.00 | 2024/03 | 24 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 25: Setting The Ip Address Via Tas (Turck Automation Suite)
Fig. 21: Turck Automation Suite: Scan network The Turck Automation Suite shows the connected devices. Fig. 22: Turck Automation Suite: found devices V03.00 | 2024/03 | 25 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 26: Programming With Codesys
EtherCAT OPC-UA 7.5.2 Access to the CODESYS WebVisu The CODESYS WebVisu is accessed via port 8085: http://<<IP address>>:8085/webvisu.htm Example: http://192.168.1.40:8085/webvisu.htm V03.00 | 2024/03 | 26 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 27: Programming With Tx Visupro
Tap-Tap-Mode [} 29] Ò Startup sequence Ò sign on as „admin” and move CODESYS- App from the Boot Sequence area to Installed Aps. V03.00 | 2024/03 | 27 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 28: Transferring Tx Visupro To The Device
Project transfer via a USB stick „ Create an update package with TX VisuPro and copy it to a USB stick. V03.00 | 2024/03 | 28 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 29: Configuring
In addition to the options in user mode, the system mode includes additional commands for system upgrade and recovery. Device without TX VisuPro runtime Device with software error V03.00 | 2024/03 | 29 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 30 Services Activate/deactivate services (e.g. OpenSSH server, bridge, cloud, router, SNMP, logging) V03.00 | 2024/03 | 30 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 31 By default, the device is restarted in user mode via the "Main OS" option. The "Configuration OS" option restarts the device directly in System Settings in System Mode. V03.00 | 2024/03 | 31 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 32: Operating
LED orange (left LED) Meaning No Ethernet connection Ethernet connection established LED green (right LED) Meaning No data transfer Flashing Data transfer V03.00 | 2024/03 | 32 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 33: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. V03.00 | 2024/03 | 33 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 34: Repair
The device the lithium battery must be disposed of properly in accordance with WEEE Directive 2012/19/EU and does not belong in normal household waste. V03.00 | 2024/03 | 34 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 35: Technical Data
For applications requiring compliance with EN 61131-2 and specifically in reference to 10 ms voltage dips, the minimum power supply voltage is 18 VDC. V03.00 | 2024/03 | 35 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 36 Port: DC mains 0 %, duration: 10 ms, 20 fields × 1 s Test executed on the 24Vdc of the EUT EN 61000-4-29 V03.00 | 2024/03 | 36 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 37: Appendix: Approvals And Markings
Declarations of conformity (current version) cULus File No. E484727 File No. E484803 Class I, Division 2, Groups A, B, C and D V03.00 | 2024/03 | 37 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 38: Turck Branches - Contact Data
Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it Japan TURCK Japan Corporation ISM Akihabara 1F, 1-24-2, Taito, Taito-ku, 110-0016 Tokyo www.turck.jp V03.00 | 2024/03 | 38 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 39 United Kingdom TURCK BANNER LIMITED Blenheim House, Hurricane Way, GB-SS11 8YT Wickford, Essex www.turckbanner.co.uk Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V03.00 | 2024/03 | 39 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 40 Over 30 subsidiaries and 60 representations worldwide! 100018315 | 2024/03 100018315 www.turck.com...
Need help?
Do you have a question about the TX700S and is the answer not in the manual?
Questions and answers