Advertisement
Application Manual
Restaurant area – room automation
Using a webbrowser, all rooms can be controlled and
monitored via webserver (IP viewer). The following
parameters can be viewed/changed, if required:
Secondary
The Application Sheets listed below describe individual controller applications and contain detailed information.
documents
They can be downloaded from the Internet at
Application no.
Synco Application Sheet,
Individual Rooms
TB0001 DG4 HQ
Synco Application Sheet,
Centrally Managed Rooms
QCA001 MB7 HQ
Synco Application Sheet,
Central Operating and Monitor-
ing
OWAL03 772 HQ
Gamma Application Sheet,
Lighting
L00004 UP2 HQ
Gamma Application Sheet,
Shading
B00003 AP2 HQ
·
The room operating modes, individually or
in groups
·
The room temperature setpoints, individual-
ly or in groups
·
The time program for every room or for
groups of rooms
·
Heating plant parameters (setpoints, oper-
ating modes)
·
The state of lighting (on/off)
·
Room occupancy
Display of energy efficiency
The OZW772 webserver is able to display the HVAC
system's energy efficiency, which reminds the user if
– from the point of view of energy efficiency – settings
beyond the permitted limits were made. If nonefficient
operating states occur, the user is notified via e-mail
or smartphone app. The limit values can be set by the
user.
www.siemens.com/hit
Name of application
VAV plant, single duct
Central control of room temperature control
equipment
Local plant operation and monitoring via local network
with webbrowser
Daylight- and presence-dependent lighting control
(via DALI)
Shading of façades including sun tracking control and
shadow outline tracking
Nr. 09
Synco™
& Gamma
·
Status information from lamps, such as er-
ror messages or number of operating hours
·
State of blinds (raised/lowered)
Product no.
RDG400KN
RMB795B
OZW772
UP 258E21
AP 257/22
52
Advertisement
