Fiber Port Leds - HP 1420 Series Getting Started Manual

NOTE:
A port with a smaller port ID has a higher priority for getting power. When the PoE power reaches the
guard band and a new port requires power, the switch compares the port IDs and performs one of the
following actions:
Does not supply power to the new port if the ID of the new port is greater than IDs of all existing ports.
•
• Stops power supply to existing ports whose IDs are greater than the ID of the new port, and supplies
power to the new port.

Fiber port LEDs

Table 8 SFP port LED description
Status
Steady yellow
Flashing yellow
Steady green
Flashing green
Off
Table 9 SFP+ port LED description
Status
Steady yellow
Flashing yellow
Steady green
Flashing green
Off
Description
A 100-Mbps link is present.
The port is receiving or sending data at 100 Mbps.
A 1000-Mbps link is present.
The port is receiving or sending data at 1000 Mbps.
No link is present.
Description
A 1000-Mbps link is present.
The port is receiving or sending data at 1000 Mbps.
A 10-Gbps link is present.
The port is receiving or sending data at 10 Gbps.
No link is present.
19