Table of Contents
Advertisement
Maintenance
16 Maintenance
16.1 Safety during maintenance
Maintenance, inspection and installation works must exclusively be carried out by authorised
and qualified skilled personnel. Prior to undertaking any measures on the CLEARPOINT
the skilled personnel shall read up on the device by carefully studying the operating
instructions. The operator is responsible for the adherence to these provisions. The
respective directives in force apply to the qualification and expertise of the skilled personnel.
For safe operation, the device must only be operated and maintained in accordance with the
indications in the operating instructions. In addition, the national and operational statutory
provisions and safety regulations, as well as the accident prevention regulations required for
the respective case of application, need to be observed during employment. This applies
accordingly when accessories are used.
Danger!
Incorrect maintenance!
Incorrect maintenance of the CLEARPOINT
Ensure that the personnel in charge of the operation, supervision and repair of the
CLEARPOINT
NOTE!
Maintenance works!
Operation, system performance checks, installation, setting and maintenance measures at
the compressed-air system must only be carried out by skilled personnel
operator.
3
Authorised skilled personnel are persons who are authorised by the operator, with experience and technical
training, who are well-grounded in the respective provisions and laws and capable of carrying out the required works
and of identifying and avoiding any risks during the machine transport, installation, operation and maintenance.
40
®
V are sufficiently instructed and competent for this task.
®
V involves the risk of personal injury.
CLEARPOINT® L 205 – L295 V
®
V
3
authorised by the
Advertisement
Table of Contents
