Transport And Set-Up; Safety During Transport And Set-Up; Transport - Beko CLEARPOINT Series Instructions For Installation And Operation Manual

Transport and set-up

12 Transport and set-up

12.1 Safety during transport and set-up

IMPORTANT!
Danger through improper transport!
The CLEARPOINT
skilled personnel.
Only use suitable and technically sound lifting tools!
Only use lifting tools with a sufficient carrying capacity!
The respective national regulations and directives in force must be adhered to. Otherwise,
personal injuries may occur.
IMPORTANT!
Danger through damaged components!
Under no circumstances should you start up a damaged CLEARPOINT
components can impair the operational reliability and cause further damage.

12.2 Transport

®
The CLEARPOINT V activated-carbon adsorber was thoroughly tested and packed prior to leaving the
factory. It was in a perfect condition when handed over to the forwarding agent.
Despite all due care, transport damage cannot be excluded. Therefore, check the CLEARPOINT
possible transport damage subsequent to transport and removal of the packaging material. The
forwarding agent and BEKO TECHNOLOGIES or the BEKO TECHNOLOGIES agency must be informed
immediately about any kind of damage. If no evident damage to the packaging or the plant was
ascertained but hidden defects are detected at a later moment in time, the forwarding agent must
immediately be informed so as to allow him to assess and document the damage.
In the event that the plant is damaged, it is imperative to contact the manufacturer to know whether or not
the system may be started up.
Please observe the following points regarding the transport:

Provide suitable lifting tools for the transport.

Persons in charge of the transport must have the corresponding qualification.

With the lifting tools, the activated-carbon adsorber must only be lifted at the intended points
(transport pallet, frame, eyebolts on the top of the container).

Observe the weight of the activated-carbon adsorber and the maximum permitted load of the
lifting tools and means of transport used.

National regulations regarding accident prevention must be adhered to.
24
®
V must only be transported and installed by qualified and authorised
®
V. Defective
CLEARPOINT® L 205 – L295 V
®
V for