Table of Contents
Advertisement
4.2 General safety instructions
Installation works must exclusively be carried out by authorised and qualified skilled
personnel. Prior to undertaking any measures on the CLEARPOINT
shall read up on the device by carefully studying the operating instructions. The operator is
responsible for the adherence to these provisions. The respective directives in force apply to
the qualification and expertise of the skilled personnel.
For safe operation, the device must only be installed and operated in accordance with the
indications in the operating instructions. In addition, the national and operational statutory
provisions and safety regulations, as well as the accident prevention regulations required for
the respective case of application, need to be observed during employment. This applies
accordingly when accessories are used.
Danger!
Compressed air!
Risk of serious injury or death through contact with quickly or suddenly escaping
compressed air or through bursting and/or unsecured plant components.
All types of installation, maintenance and repair works must only be carried out when the
CLEARPOINT
It is the operator's duty to ensure that the connected pressure generator is secured against
exceeding of the maximum operating overpressure and the temperature limits at the
CLEARPOINT
Pressure relief valves used need to be arranged in such a manner that endangering of
persons is excluded. Where required, observe the manufacturer's additional advice. Suitable
and permissible arming devices need to be provided in accordance with the local regulations.
The max. permissible operating parameters, such as the operating overpressure,
temperature and volume flow must not be exceeded. The max. permissible operating
parameters are specified on the type plate and in the technical data (see "Technical data"
section).
Never make structural modifications to the plant!
Use suitable tools and genuine spare parts and accessories only!
Only use fittings and connecting elements that are approved for this application. It is of vital
importance to observe the specifications of the respective manufacturer. Ensure that the
connections are installed according to good professional practice.
Only use pipes, valves and fittings which are suitable for the pressure and temperature
range. It is of vital importance to observe the specifications of the manufacturer.
Sudden impact through pressure build-up can cause damage and escape of compressed air.
Avoid a sudden pressure build-up by operating the valves slowly.
Check all pipe connections subsequent to the installation and retighten them if necessary!
The general safety and accident prevention regulations apply!
Prior to the start-up, a leak test needs to be carried out. This test shall only be effected by
correspondingly qualified skilled personnel in compliance with the safety regulations.
Caution!
Unauthorised intervention!
Unauthorised interventions may endanger persons and plants and lead to
malfunction.
CLEARPOINT® L 205 – L295 V
®
V is pressureless.
®
V.
Safety instructions
®
V, the skilled personnel
9
Advertisement
Table of Contents
