Beko CLEARPOINT Series Instructions For Installation And Operation Manual page 39

Container pressure too low / Operating pressure in the system too low
Possible cause of failure
Pressure difference of the inlet filter is too high
The compressed-air system upstream of the
activated-carbon adsorber is pressureless
Larger amounts of wear debris in the system:
clogged compressed-air distributor or filter
elements
NOTE!
In the event of malfunctions which are not listed here or which cannot be eliminated, please
contact BEKO TECHNOLOGIES GMBH.
CLEARPOINT® L 205 – L295 V
Troubleshooting and fault elimination
Fault elimination

Check the pressure drop via the inlet filter

Replace the filter element, if required

Check the compressed-air system
upstream of the activated-carbon adsorber

Eliminate any faults

Replace the dust filter element

Replace the activated carbon

Clean the compressed-air distributor

Verify the operating conditions (pulsation,
volume flow)
39