Applied Eu Directives And Harmonised Standards - Beko CLEARPOINT Series Instructions For Installation And Operation Manual


The place of installation, installation conditions

The pressure and temperature of the inlet air

The ambient temperature
The device is supplied as accepted in the factory. The operator only needs to establish the connections
with the compressed-air system, which is described in the following chapters.
WARNING!
Improper use!
The following is considered as improper use and is prohibited:

Exceeding the max. permissible operating pressure

Exceeding the max. permissible operating temperature

Exceeding the max. permissible volume flow

Employment of the CLEARPOINT

All individual cases of application which are not described as proper us
7

Applied EU directives and harmonised standards

Applied EU directives:
97/23/EC
Harmonised standards applied:
EN 10216-2:
EN 10028-2:
EN 10242:
AD-2000 bulletins
CLEARPOINT® L 205 – L295 V
Applied EU directives and harmonised standards
Pressure Equipment Directive
Seamless steel tubes for pressure purposes. Technical delivery conditions -
Part 2: Non-alloy and alloy steel tubes with specified elevated temperature
properties
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy
steels with specified elevated temperature properties
Threaded pipe fitting in malleable cast iron
®
V in hazardous areas
15