Available Options - Beko CLEARPOINT Series Instructions For Installation And Operation Manual

Activated-carbon adsorber without dust filter
Hide thumbs Also See for CLEARPOINT Series:
Table of Contents

Advertisement

Technical data

10.2 Available options

Prefilter
Afterfilter
Compressed-air dryer
Oil check indicator
®
METPOINT
OCV residual
oil measuring device
Service determination
residual oil content
20
It is recommended to use a BEKO ultrafilter with an automatic
condensate drain. This prefilter ensures that the oil aerosol content of
the incoming air does not exceed a value of 0.01 mg/m³.
For details, please refer to the following filter selection table.
Downstream
of
each
(minimum requirement 1 µm) must be installed that retains dusts and
particles from the activated carbon that develop due to the way the
system operates.
It is recommended to use a BEKO dust filter in an oil and grease-
free version.
For details, please refer to the following filter selection table.
For the safe functioning of the CLEARPOINT
must not exceed a relative humidity of 30% at the inlet into the
activated-carbon adsorber. The service life of the activated-carbon
adsorber will be reduced when these values are exceeded. Therefore,
the employment of a refrigeration or even an adsorption dryer is
required upstream of the activated-carbon adsorber.
Please contact our specialist departments to select a suitable
compressed-air dryer.
For the rough assessment of the compressed-air quality, an oil check
indicator can be used. The oil check indicator can be installed on the
head of the CLEARPOINT dust filter (you will find the adapter and oil
check indicator, as well as replacement test tubes, in our price list).
For the continuous qualitative assessment of the compressed-air
quality, the use of our METPOINT
is advisable. By means of a measuring section, the METPOINT
can be installed in the pipework downstream of the afterfilter, and will
then show the residual oil vapour content ONLINE.
Our service department will be happy to submit you a corresponding
offer for the cyclic qualitative assessment of the compressed-air quality.
activated-carbon
adsorber,
®
V, the compressed air
®
OCV residual oil measuring device
CLEARPOINT® L 205 – L295 V
an
afterfilter
®
OCV

Advertisement

Table of Contents
loading

Table of Contents