Beko CLEARPOINT Series Instructions For Installation And Operation Manual page 11

Danger!
Incorrect start-up!
The incorrect start-up of the CLEARPOINT
Prior to starting up the CLEARPOINT
instructed according to these instructions for installation and operation with regard to the set-
up, monitoring, operation and maintenance of the plant, as well as to the safety measures to
be observed.
CAUTION!
Operational reliability at risk!
Overloading the CLEARPOINT
Observe the permissible temperature range!
Do not exceed the permissible volume flow!
NOTE!
Operational reliability at risk!
Incorrect installation can compromise the operational reliability and affect service measures.
The clear diameter of the pipe joint must be at least as large as the mounting dimension of
the CLEARPOINT
It is strongly recommended to install a shut-off valve both upstream and downstream of the
CLEARPOINT
To maintain the supply of compressed air during service failures, maintenance and repair
works on the CLEARPOINT
is advisable. This bypass line must have a shut-off valve.
Danger!
Mishandling!
Mishandling of the CLEARPOINT
Prior to starting up the CLEARPOINT
instructed according to these instructions for installation and operation with regard to the set-
up, monitoring, operation and maintenance of the plant, as well as to the safety measures to
be observed.
CLEARPOINT® L 205 – L295 V
®
V can compromise the operational reliability!
®
V.
®
V for the implementation of service measures.
®
V, the installation of a bypass line around the CLEARPOINT
®
V may endanger persons.
®
V may endanger persons.
®
V, it must be ensured that the operating staff are
®
V, it must be ensured that the operating staff are
Safety instructions
®
V
11