ABB RELION 615 Series Product Manual page 12

Motor Protection and Control
REM615
Product version: 5.0 FP1
messaging. In addition, process bus with the sending of
sampled values of analog currents and voltages and the
receiving of sampled values of voltages is supported.
Compared to traditional hard-wired, inter-device signaling,
peer-to-peer communication over a switched Ethernet LAN
offers an advanced and versatile platform for power system
protection. Among the distinctive features of the protection
system approach, enabled by the full implementation of the IEC
61850 substation automation standard, are fast
communication capability, continuous supervision of the
protection and communication system's integrity, and an
inherent flexibility regarding reconfiguration and upgrades.This
protection relay series is able to optimally utilize interoperability
provided by the IEC 61850 Edition 2 features.
At substation level, COM600S uses the data content of the bay-
level devices to enhance substation level functionality.
COM600S features a Web browser-based HMI, which provides
a customizable graphical display for visualizing single-line
mimic diagrams for switchgear bay solutions. The SLD feature
is especially useful when 615 series relays without the optional
single-line diagram feature are used. The Web HMI of
COM600S also provides an overview of the whole substation,
including relay-specific single-line diagrams, which makes
information easily accessible. Substation devices and
Table 3. Supported ABB solutions
Product
Substation Management Unit COM600S
MicroSCADA Pro SYS 600
System 800xA
12
processes can also be remotely accessed through the Web
HMI, which improves personnel safety.
In addition, COM600S can be used as a local data warehouse
for the substation's technical documentation and for the
network data collected by the devices. The collected network
data facilitates extensive reporting and analyzing of network
fault situations by using the data historian and event handling
features of COM600S. The historical data can be used for
accurate monitoring of process and equipment performance,
using calculations based on both real-time and historical
values. A better understanding of the process dynamics is
achieved by combining time-based process measurements
with production and maintenance events.
COM600S can also function as a gateway and provide
seamless connectivity between the substation devices and
network-level control and management systems, such as
MicroSCADA Pro and System 800xA.
GOOSE Analyzer interface in COM600S enables the following
and analyzing the horizontal IEC 61850 application during
commissioning and operation at station level. It logs all GOOSE
events during substation operation to enable improved system
supervision.
Version
4.0 SP1 or later
4.1 or later (Edition 2)
9.3 FP2 or later
9.4 or later (Edition 2)
5.1 or later
1MRS756890 N
ABB