Quick Start - Silicon Laboratories Si5372 User Manual

2. Quick Start

™
1. Install ClockBuilderPro
• Installation instructions and the user's guide for ClockBuilderPro can also be found at the download link shown above.
2. Connect a USB cable from the Si5372-EVB to the PC where the software is installed.
3. Leave the jumpers as installed from the factory, and launch the ClockBuilderPro
4. You can use ClockBuilderPro
5. Contact Silicon Labs for the Si5372 data sheet.
silabs.com | Building a more connected world.
desktop software: http://www.silabs.com/CBPro.
™
to create, download, and run a frequency plan on the Si5372-EVB.
UG372: Si5372 Evaluation Board User's Guide
™
software.
Quick Start
Rev. 1.0 | 3