Introduction; Safety Information - PCE Health and Fitness PCE-AS1 User Manual

1

Introduction

PCE-AS1 is a modern air sampling meter that helps users assess microbiological pollution. The
device uses the impaction principle when taking measurements. After air samples are taken and an
incubation has occurred, the number of microorganisms can be determined. The air sampling
meter must be used in a clean environment such as a pharmaceutical or food production facility.
The air sampling meter meets the latest requirements for devices used for airborne microbial
analysis. When samples are taken, the air particles enter through the surface of the meter. The
particles then hit the surface of the medium in the Petri dish. The medium maintains the activity of
the bacteria, creating the best conditions.
2

Safety information

•
Please read the manual before using the device to prevent damages caused
by failing to observe the instructions.
•
The device is only to be used in the manner described. If the device is
used otherwise, it can cause a hazard.
•
Do not expose the device to extreme temperature, direct
sunlight or extreme humidity and moisture.
•
Make no technical changes to the device.
•
The device should only be cleaned with a wet cloth. Do not use abrasive or
solvent-based cleaning agents.
•
The device should only be used with PCE-offered accessories or
equivalent replacements.
•
The device must not be used when the ambient conditions
(temperature, humidity ...) are outside the specified limits.
•
If the device is not used for a long time, the device should be kept in a case. It is
recommended to use the device at least once a month for at least 20 minutes.
3