Technical Maintenance Works - K&S BASIC KSB 6000D Owner's Manual

!
Failure to follow these instructions may lead to damage of the
rotor and stator windings, the AVR unit.
!
An overload may lead to automatic activation of generator
protection machine. Reduce the load. Reconnect the generator
no earlier than 5 minutes after switching off.

TECHNICAL MAINTENANCE WORKS

Works, specified in "Technical maintenance" section, are to be regularly
performed. If the the generator user has no possibility to perform regular
maintenance independently, it is necessary to address the official service center
to registrate an order for such works performance.
!
In case of any damages, occurred due to non-performance of regular
maintenance works, the manufacturer bears no responsibility
Such damages are also:
• Damages occurred as a result of using non original spare parts;
• Corrosion damages and other results of improper equipment storage;
• Damages occures as a result of maintenance performance by inexperienced
and unauthorized specialists.
Manual compliance
Technical maintenance, operation and K&S Basic™ generator storage are
to be performed according to this manual recommendations. Manufacturer
bears no responsibility for damages and losses, caused by incompliance to safety
requirements and technical maintenance rules.
First of all this applies to:
- use of lubricants, gasoline and motor oils, forbidden by the manufacturer;
- device technical alterations;
- equipment operations against its intended use;
- indirect damages, caused by operating faulty equipment;
!
IMPORTANT!
!
IMPORTANT!
!
IMPORTANT!
for such damages.
12