INTRODUCTION Thank you for your purchase of K&S Basic products. This manual contains a brief description of safety, use ® and debugging. More information can be found on the official manufacturer’s website in the support section: konner-sohnen.com/manuals You can also go to the support section and download the full version of the manual by scanning the QR code, or on the website of the official importer of K&S Basic products: www.konner-sohnen.com ®...
ELECTRICAL SAFETY The device generates electricity. Follow safety precautions to ATTENTION – DANGER! avoid electric shock. The generator should be used as an IT or TN system based on the application. Earthing and additional protective measures such as insulation monitoring or protection against accidental contact IMPORTANT! (residual current device) must be provided based on the applica- tion and the system used.
SPECIFICATIONS Model KSB 30A KSB 70C Voltage, V Maximum power, kW Rated power, kW Frequency, Hz Current max, A 12,17 23,91 Outlets 2*16А 1*16А, 1*32А Fuel tank capacity, l Voltmeter Noise level Lpa(7m)/Lwa, dB 71/96 72/97 Output 12 V, A...
The manufacturer reserves the right to make changes in the prod- uct design, configuration and construction. Illustrations in this IMPORTANT! manual are for reference only and may differ from actual compo- nents and inscriptions on the products. 1. Voltmeter or LED display 2.
If the generator has not been used for a long time, recharge the IMPORTANT! battery with a charger (not included). ENGINE START ENGINE START Before starting the engine make sure that the total power of tools or power consumers corresponds to the rated power of the generator.
In case of any damages, occurred due to non-performance of reg- ular maintenance works, the manufacturer bears no responsibility IMPORTANT! for such damages. SUCH DAMAGES ARE ALSO: SUCH DAMAGES ARE ALSO: - Damages occurred as a result of using non original spare parts. - Corrosion damages and other results of improper equipment storage.
Page 8
In general, the engine is recommended to run with motor oils of SAE10W-30, SAE10W-40 viscosity level. Motor oils with other viscosity levels, may be used only if the average air temperature in your region does not exceed the limits of the temperature range, specified in the table. Oil viscosity according to SAE standards or service category, are specified on the API capacity sticker.
CLEANING THE FILTER: CLEANING THE FILTER: 1. Open the air filter cover. 2. Remove the sponge filtering element. 3. Remove all dirt deposits inside the hollow case of the air filter. 4. Thoroughly wash the filtering element in warm water. 5.
Page 11
CONTACTS Deutschland: DIMAX International GmbH Flinger Broich 203 -FortunaPark- 40235 Düsseldorf, Deutschland www.koenner-soehnen.com Ihre Bestellungen Ihre Bestellungen orders@dimaxgroup.de Kundendienst, technische Fragen Kundendienst, technische Fragen und Unterstützung und Unterstützung support@dimaxgroup.de Garantie, Reparatur und Service Garantie, Reparatur und Service service@dimaxgroup.de Sonstiges Sonstiges info@dimaxgroup.de Polska: DIMAX International...