Download And Installation; Cc3220 Software Development Kit (Sdk); Service Pack; Uniflash Tool - Texas Instruments CC3220 Getting Started Manual

1.1

CC3220 Software Development Kit (SDK)

• Download the following software at
• Run the installer by double-clicking on the CC3220 SDK installer.
• Read and accept the license agreement to proceed.
• Choose the desired path to place the package (else default is chosen).
• Proceed with the installation and click Finish once done.
1.2

Service Pack

If the board is not already flashed with the service pack for SDK <version>, the latest service pack for
SDK <version> must be flashed on the CC3220 wireless MCU. The most updated service pack is
available under <sdk-installation>\tools\cc32xx_tools\servicepack-cc3x20. To program the service pack
with an UniFlash, the binary file (.bin) must be loaded to the Files/Service Pack.
1.3

UniFlash Tool

UniFlash is a stand-alone tool used to program on-chip flash memory on TI MCUs and onboard flash
memory for Sitara processors. The tool lets the developer download application image, service pack, and
other files on the serial flash of the CC3220 device. It also enables the creation of OTA (Over-The-Air)
images.
1. Download the Image Creator tool from http://www.ti.com/tool/uniflash.
2. Run the installer by double-clicking on it. Click Next to continue, as shown in
4

Download and Installation

CC3220 SDK package.
Figure 1-1. Install UniFlash
Copyright © 2017–2018, Texas Instruments Incorporated
SWRU461B – February 2017 – Revised June 2018
Download and Installation
Figure
SWRU461B – February 2017 – Revised June 2018
Submit Documentation Feedback
Chapter 1
1-1.