Download The Application - Texas Instruments CC3220 Getting Started Manual

Download the Application

2.4 Download the Application
You can program any application to the SFLASH using the UniFlash tool. For a CC3220SF device, the
application will be copied to the internal flash at the next device boot.
Do the procedure that follows to flash the Network Terminal application.
1. Run the UniFlash tool.
2. Select CC3120 / CC3220 from the list of devices (you may type CC3... to the search tab to filter out
other devices). See
18
Execute your First Application
Figure 2-5.
Figure 2-5. UniFlash – Select Device
Copyright © 2017–2018, Texas Instruments Incorporated
SWRU461B – February 2017 – Revised June 2018
Submit Documentation Feedback
www.ti.com