Iar; Gcc - Texas Instruments CC3220 Getting Started Manual

www.ti.com
5. Launch the application. Select the network_terminal_CC3220SF_LAUNCHXL_tirtos_ccs project in
Project Explorer and click on the debug icon, as shown in
and begin debugging. Press F8 to begin execution.
6. Follow instruction in
3.4

IAR

See <sdk-installation-path>\docs\cc3220\CC3220_SDK_IAR_project_setup_guide.html.
3.5

GCC

GCC is not supported in the demos of this release.
SWRU461B – February 2017 – Revised June 2018
Submit Documentation Feedback
Figure 3-5. Debug Network Terminal
Section 2.6.
Copyright © 2017–2018, Texas Instruments Incorporated
Figure 3-5, to download code to the device
Use the Debugger/IDE
IAR
39